AXAGON ADSA-1S6 storage drive enclosure HDD/SSD enclosure Black 2.5"

A compact AXAGON ADSA-1S6 SLIMport6 high-speed adapter with USB 3.0 and SATA 6G interface intended for easy connection of SSD or 2.5" SATA disk.<br><br>A handy tool to quickly connect a SSD or laptop disk, including boot support.<br><br>The UASP support significantly increases transmission rates especially when working with small files in the queue.<br><br>The TRIM feature support limits the gradual degradation of SSD performance over time.<br><br>Reading of S.M.A.R.T. information monitoring the condition of the connected disks. Supports spinning down of connected disks as well as an adapter.<br><br>The installation can be handled even by a layman — the disk connects to the adapter and the adapter to the computer's USB port; the rest is done automatically.<br><br>Minimum dimensions and weight, along with an enclosed disc case, make the product ideally suited even for mobile use.<br><br>Features:<br>• Compatible with USB 3.0 and backward compatible with USB 2.0.<br>• Supports transmission rates 12 / 480 / 5000 Mb/s (low / full / high speed).<br>• Supports 2.5" SATA III / II / I disks of all capacities.<br>• Compliant with Serial ATA 3.1 specification (SATA/600), transmission rates of up to 6 Gb/s.<br>• Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s).<br>• Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s).<br>• The total bandwidth / transmission rate of the adapter is determined by the USB 3.0 interface used (theor. 5 Gbit/s).<br>• Supports UASP (USB Attached SCSI Protocol) and BOT (Bulk-Only Transport).<br>• Supports booting from SSD/HDD connected via an USB adapter.<br>• HDD Auto Spindown — automatic spindown of a disk after period of inactivity lasting 22 minutes.<br>• HDD Turn Off — turns off the disk after removing the device or spinning down the PC.<br>• Possibility to connect your device while running thanks to the Hot Plug support.<br>• Full Plug and Play support.<br>• Connection via USB 3.0 micro B female connector.<br>• USB 3.0 cable USB 3.0 Type A male / USB 3.0 Type B male 10 cm long is included.<br>• Supplying the power via USB 3.0 bus up to 900mA from one USB port is sufficient in all cases.<br>• A blue LED indicating the connection to the computer's USB port (permanent light) and data transmission (blinking).<br>• Compact adapter dimensions 70 x 21 x 10 mm.<br>• Adapter weight only 11 g, weight of USB cable 18 g.<br>• Simple plastic case holds 2.5" disk max. 9.5 mm high with USB adapter connected (USB cable is led out through hole in the case).<br>• For thin 7mm SSDs/HDDs foam pads are included for better fit in the case.<br>• The case can also serve to transport or store the adapter itself without the disk, with the USB cable inside the case.<br>• Case dimensions 122 x 78 x 19 mm.<br>• Case weight 40 g.<br><br>Supported OSs:<br>• MS Windows XP / Vista / 7 / 8 / 8.1 / 10 and later, Windows Server 2003 / 2008 / 2012 / 2016 and later (supported are all 32- and 64-bit Windows OS versions), Mac OS X 10.x and higher, Linux with kernel 2.6.x and above.<br>• Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available. <br><br>Package contains:<br>• USB 3.0 — SATA 6G adapter,<br>• USB 3.0 cable 10 cm,<br>• plastic case for 2.5" disk and USB adapter,<br>• foam pads for 7 mm HDDs and SSDs,<br>• Packed in a cardboard box with the installation procedure included.Axagon ADSA-1S6. Product type: HDD/SSD enclosure. Number of storage drives supported: 1, Storage drive size: 2.5", Supported storage drive interfaces: Serial ATA, Serial ATA II, Serial ATA III. Data transfer rate: 5 Gbit/s. Hot-swap. Product colour: Black. USB connector type: USB Type-A