DAHUA Camera module VTO4202F-P

Features:  • Anodized front aluminum panel; IK07 • Supports voice and video communication • 2 MP high definition fisheye camera with 160° view range • Access control function; controls two locks • Surface mount and flush mount • IP65 (Apply silica gel to gaps between the device and the wall. Liquid sodium silicate is recommended. For details, see the quick start guide.)  Technical Specifications:  System • Main Processor SoC processor • Operating System Embedded Linux operation system • Network Protocol IPv4, RTSP, RTP, TCP, UDP, SIP, P2P Basic • Camera CMOS Low illumination 2MP HD colorful 160° fisheye camera • Angle of View H:160°, V:82°, D:180° • Focal Length 1.95 mm • WDR • Noise Reduction Noise suppression and echo cancellation • Video Encoding H.264 • Frame Rate PAL: 25 fps; NTSC: 30 fps • Video Bit Rate 256K to 2M • Light Compensation IR light • Day/Night Switch Yes • Audio Encoding PCM G.711 A G.711 U • Audio Input Built-in omnidirectional microphone • Audio Output Built-in loudspeaker • Audio Bit Rate 16Khz 16bit Function • Communication Methods: Digital communication • Unlock Mode Remote unlocking • Auto Snapshot Yes • Leave Videos or Text • Messages Yes • Web Configuration Yes Performance • Housing Material Aluminum Port • RS-485 Port 1 RS-485 half-duplex port • Alarm Output Port 1 • Power Output Port 1-ch 12 VDC output 100mA • Unlock Button Exit button for opening the door • Door Status Detection Detects door magnetic status • Door Lock Control NC/COM/NO • Ethernet Port 10/100 Mbps self-adaptive Ethernet/2-wire Alarm • Tamper Alarm Tamper alarm Regular • Ingress Protection • IP65 (Apply silica gel to gaps between the device and the wall. Liquid sodium silicate is recommended. For details, see the quick start guide.) • Appearance Color Silver • Housing Material Aluminum • Power Supply Mode 12 VDC/PoE • Installation Method Surface mount and flush mount • Accessory Mounting box • Dimensions 100mmЧ100mmЧ49.30mm (3.94«Ч3.94»Ч1.94") Protection Grade • IK07, IP65 (Apply silica gel to gaps between the device and the wall. Liquid sodium silicate is recommended. For details, see the quick start guide.) • Working Temperature -20°C to +60°C (-4°F to +140°F ) • Working Humidity 10%RH–90%RH • Power Consumption ?12W • Net Weight 0.35kg (0.77 lb) • Gross Weight 0.4kg (0.88 lb)